Concrete Hardener Densifier Products

/Concrete Hardener Densifier Products
Concrete Hardener Densifier Products2018-07-04T09:35:45+00:00
Concrete Hardener Densifier Material Systems

Concrete Floor Hardener Products | Concrete Densifier Materials

Floor Hardener and Densifier 5329

A colorless, odorless blend of 100% active sodium silicate and siliconate to strengthen, harden, densify and dustproof new or existing concrete and masonry floors.  TK-5329 penetrates into the concrete, sealing the pores and capillaries and creating a chemical reaction within the concrete to produce a hard mineral film that is resistant to water, chemicals and abrasion. Increases the strength of the surface by filling the pores – decreasing porosity while increasing density. Treated surfaces have higher resistance against water, chemicals and abrasion and require less maintenance and up-keep. Creates a breathable surface for passage of moisture vapor. Contains no solvents or fumes, is non-toxic, non-combustible and complies with all VOC regulations. Does not leave a film and will not make surfaces slippery. Short downtime; floors can be put back into service immediately after application. Compatible with floor and carpeting adhesives and most striping paints.

LS Hard N Guard Lithium Silicate Blend

A high performance, high-gloss hardener and protective surface treatment for concrete floors and surfaces. TK-LS HARD N GUARD makes use of lithium silicate nanotechnology to increase hardness, density and durability on new and existing concrete. Treated surfaces have higher resistance against water, chemicals and abrasion and require less maintenance and up-keep. Produces an attractive showroom-quality gloss over ground and polished concrete floors. Easy application; no scrubbing, flushing or waxing required. Aids in color retention making it ideal for integral colored concrete and stained floors. Short downtime; floor may be used approximately 1 hour after application.

Additional information for these concrete floor hardener and concrete densifier material systems

TK-FLOOR HARDENER & DENSIFIER 5329 Concrete floor hardener and concrete densifier material

PRODUCT DESCRIPTION

TK-FLOOR HARDENER & DENSIFIER 5329 is a colorless, odorless blend of 100% active sodium silicate and siliconate to strengthen, harden, densify and dustproof new or existing concrete and masonry floors. It penetrates into the concrete, sealing the pores and capillaries and creating a chemical reaction within the concrete to produce a hard mineral film that is resistant to water, chemicals and abrasion.

Features:

  • Increases the strength of the surface by filling the pores – decreasing porosity while increasing density.
  • Treated surfaces have higher resistance against water, chemicals and abrasion and require less maintenance and up-keep.
  • Creates a breathable surface for passage of moisture vapor.
  • Contains no solvents or fumes, is non-toxic, noncombustible and complies with all VOC regulations.
  • Does not leave a film and will not make surfaces slippery.
  • Short downtime; floors can be put back into service immediately after application.
  • Compatible with floor and carpeting adhesives and most stripping paints.

Testing Data:

Impact Resistance: ASTM C42 Increases resistance

Abrasion Resistance: ASTM C779 33% increase in resistance

Hardening: ASTM C39 42% increase in compressive strength at 7 days. 39% increase at 28 days over untreated samples.

Coefficient of Friction: ASTM C1028 0.69 wet / 0.86 dry

Bonding Adhesion: ASTM D3359 16.7% increase in epoxy adhesion. No change in polyurethane adhesion.

Light Exposure: ASTM G23 No effect by ultra violet light or water spray exposure.

TK-LS HARD N GUARD Lithium Silicate Concrete Floor Hardener and Protective Treatment

PRODUCT DESCRIPTION

TK-LS HARD N GUARD is a high performance, high-gloss hardener and protective surface treatment for concrete floors and surfaces. TK-LS HARD N GUARD makes use of lithium silicate nanotechnology to increase hardness, density and durability on new and existing concrete.

Features:

  • Increases the strength of the surface by filling the pores – decreasing porosity while increasing density.
  • Treated surfaces have higher resistance against water, chemicals and abrasion and require less maintenance and up-keep.
  • Produces an attractive showroom-quality gloss over ground and polished concrete floors.
  • Easy application; no scrubbing, flushing or waxing required.
  • Aids in color retention making it ideal for integral colored concrete and stained floors.
  • Short downtime; floor may be used approximately 1 hour after application.
  • Low odor and contains zero VOCs