Indoor Clear Floor Sealer Material Systems

> Home » Indoor Clear Floor Sealer Material Systems
Indoor Clear Floor Sealer Material Systems 2017-07-30T14:29:26+00:00

Clear Sealers for Indoor Floors | Clear Interior Floor Coatings

Indoor clear floor sealer material systems provide protection over stained concrete, dyed concrete, metallic epoxy floor coatings and other interior finished concrete floors. Choose the best interior clear floor coating product to meet your project performance requirements and budget. These two component indoor clear floor sealer material systems protect your finished decorative concrete floor from abrasion with superior stain resistance. Select polyurethane for an easy to apply user friendly interior clear floor coating product. Epoxy floor coatings are applied in a thicker coating to help smooth the indoor floors. Or use polyaspartic clear floor finish for a fast return to service.

Clear Indoor Floor Coatings | Clear Sealers for Indoor Floors
SureCrete Design Products DK400WB Water Base Polyurethane Clear Floor Sealer

DK400WB | Water Based Clear Polyurethane Concrete Floor Sealer

DK400WB is a clear, water based polyurethane two-component acrylic polyurethane concrete floor coating. DK400WB in either Gloss or Satin sheen provided excellent abrasion resistance and chemical protection on natural concrete and concrete overlay floors. The low VOC formula of DK400WB polyurethane allows application in odor sensitive areas. DK400WB from SureCrete Design Products is applied directly to concrete with no need for a primer. The chemical resistant and abrasion resistant floor coating remains breathable and will tolerate a moderate level of moisture vapor from the concrete substrate.

SureCrete DK400 Solvent Aliphatic Polyurethane Clear Concrete Floor Sealer

DK400 | Solvent Aliphatic High Gloss Polyurethane Concrete Floor Coating

SureCrete Design Products DK400 Solvent Aliphatic Polyurethane is a commercial grade heavy duty high gloss floor polyurethane formulated for high traffic. DK400 solvent polyurethane concrete floor coating provides excellent chemical resistance and abrasion resistance for protection of concrete floors, concrete overlay floors and epoxy coatings. DK400 Solvent Polyurethane is our preferred finish clear floor coating over metallic epoxy projects. The chemical resistance of DK400 Solvent Polyurethane exceeds that of most other manufacturers’ polyaspartic systems.

SureCrete DK120 Polyaspartic Clear Floor Coating

DK120 | Clear Performance Polyaspartic Concrete Floor Coating

DK120 Clear Performance Polyaspatic Concrete Floor Coating is a fast-drying user-friendly clear concrete coating system. DK120 is a 67% solids hybrid polyaspartic concrete floor coating system with an extended open time and excellent heal that produces a superior smooth finish on indoor concrete and overlay. The fast dry time and fast cure allow quick recoat intervals and a faster return to service. DK120 Clear Polyaspartic is used in grocery stores, manufacturing facilities, warehouses, restaurants, showrooms, airplane hangars, garages and anywhere a fast dry clear high performance concrete floor coating system is required.

SureCrete Design Products DK180 Polyaspartic Clear Coating

DK180 | High Build Clear Polyaspartic Indoor Concrete Floor Coating

DK180 Clear Polyaspartic Concrete Floor Coating is an 80% Solids hybrid solvent based polyaspartic system. DK180 has an extended pot life of approximately twenty minutes making it more user friendly and producing superior results on indoor concrete. DK180 Polyaspartic is a high build polyaspartic system that may be used with colored quartz aggregates and over decorative vinyl flakes for a wide variety of decorative interior concrete floor coating systems. DK180 is a lower VOC polyaspartic system (less than 200 g/L VOC). DK180 Polyaspartic is UV stable, film forming, color enhancing and high gloss.

SureCrete Design Products DK500 | 100% Solids Clear Epoxy

DK500 | Clear 100% Solids Epoxy Concrete Floor Coating

SureCrete Design Products DK500 is a premium 100% solids clear floor epoxy system. DK500 may be applied alone as clear thick build floor coating for a high gloss shine. DK500 100% Solids Epoxy is also blended with metallic pigments to create unique three dimensional colored coatings. Use DK500 clear 100% solids epoxy as the receive coat for colored quartz broadcast, and as the grout body coat for quartz floors and over decorative vinyl flakes. DK500 is available with various hardener systems selected for performance and features.

SureCrete Design Products SureFinish Industrial Acrylic Wax Floor Finish

SureFinish | Industrial Acrylic Wax Floor Finish

SureFinish is an industrial floor wax product providing exceptional coating protection for both residential and commercial applications where a durable floor protection is needed with a slip-resistant finish. Available in both gloss and matte finishes, SureFinish may be applied over any concrete floor coating or sealer to extend the service life of the coating as well as reduce slip-fall hazards. SureFinish is easy to apply with microfiber pads. SureFinish creates a durable wear surface over floor coatings. Reapply SureFinish as needed depending on traffic and wear.

SureCrete Design Products SureGrip Traction Additive

SureGrip | Traction Additive for Slip Resistant Non-Skid Floors

SureGrip is a premium grade non-slip additive for interior and exterior sealers or coatings. SureGrip consistently outperforms other slip resistant additives such as Shark Grip in durability, due to its inherent crush resistance. SureGrip is available in standard and heavy duty additive sizes. SureGrip Non-Skid is hand broadcast for maximum traction and slip-fall protection.

The best indoor clear floor sealers are available from Turning Point Innovations in Charlotte NC. Call us at 704-333-4235 to talk about your interior clear floor coating project, or stop by our Charlotte NC showroom to see samples of each indoor floor sealer. Delivery of these interior clear floor coating systems is available throughout North Carolina, South Carolina, Georgia and Virginia.

Additional information on the best interior clear floor coating material systems for your indoor floor sealer project:

DK400WB | Water Based Clear Polyurethane Concrete Floor Sealer

SureCrete Design Products DK400WB water-based clear floor polyurethane top coat is available in either a gloss or satin finish. DK400WB is formulated as a highly durable transparent flooring protective coating for interior commercial or residential applications with low VOC properties. The clear water-based floor polyurethane is a 2 component 57% solids, acrylic polyurethane designed as a non-yellowing clear coating for concrete, cement-based overlays, or as a top coat on epoxy systems. The commercial grade clear finish topcoat is available in gloss or satin finishes provides the durability of a solvent base system with the ease and safety of a low VOC (72 g/L) water base system. As a vertical wall coating, DK400WB enhances anti-graffiti properties. DK400WB water based polyurethane is ideally suited for both commercial and residential flooring anywhere in North Carolina and South Carolina: aircraft hangars, clean room floors, manufacturing facilities, warehouses, bars, clubs, retail stores, automotive showrooms, residential interiors, garage floors, stadiums, or any high traffic area where an exceedingly resilient floor is desired.

Specifications and properties of DK400WB Clear Water Based Polyurethane Concrete Floor Coating from SureCrete Design Products

Coverage: Approximately 400-500 square foot per gallon, per coat (varies based on substrate porosity and application methods)
VOC Rating: less than 72 g/L
Solids Content: 57%
Pot Life: approximately 30 minutes
Shelf Life: 1 year in original unopened container
Ready for recoat: 6-10 hours
Light Duty Use: 24 hours
Heavy Traffic Ready: 3 days
Full Cure: 5-7 days
Appearance (cured): Clear Gloss or Satin
Appearance (wet): Milky Liquid
Water Resistance: Excellent beads water
Mechanical Stability: Excellent
Light Stability: Excellent
Diluent: Water
Odor: Sweet Acrylic
Application Temperature: 50 – 90 degrees Fahrenheit

Chemical Resistance
Gasoline, no effect at 24 hrs
Diesel Fuel, no effect at 24 hrs
Kerosene, no effect at 24 hrs
Brake Fluid, softens/discolors at 24 hrs
Skydrol, dulls at 24 hrs

[return to top]

DK400 | Solvent Aliphatic High Gloss Polyurethane Concrete Floor Coating

DK400 solvent based clear high gloss floor aliphatic polyurethane is a two component 51% solids, acrylic aliphatic polyurethane designed as a non-yellowing clear coating for interior concrete, concrete overlays, or as a clear top finish coat on epoxy systems. The high-gloss clear top coat provides the premier balance of strength, added UV stability, flexibility, chemical and scratch resistance that is both user-friendly and extremely durable. DK400 Solvent Aliphatic Polyurethane clear topcoat is one of the most mechanically and chemically resistant coatings available on the market in North Carolina and South Carolina today.

Specifications and properties of DK400 Solvent Aliphatic Polyurethane Concrete Floor Coating from SureCrete Design Products

Coverage: Approximately 300-400 square foot per gallon, per coat (varies based on substrate porosity and application methods)
VOC Rating: less than 435 g/L
Solids Content: 51%
Pot Life: approximately 60 minutes
Shelf Life: 1 year in original unopened container
Ready for recoat: 6-8 hours
Light Duty Use: 24 hours
Heavy Traffic Ready: 3 days
Full Cure: 5-7 days
Appearance (cured): Clear Gloss
Appearance (wet): Clear
Water Resistance: Excellent, beads water
Mechanical Stability: Excellent
Light Stability: Excellent
Direct Impact: 30 inch/pounds
Reverse Impact: 6 inch/pounds
Hardness: Pencil 4H, Konig 100
Diluent: Hydrocarbons
Odor: Solvent
Application Temperature: 50 – 90 degrees Fahrenheit

Chemical Resistance
MEK (methyl ehtyl ketone), slightly softens at 3 mins, softens at 1 hr, blisters at 24 hrs
Xylene, no effect at 3 mins or 1 hr, softens at 24 hrs
Toulene, no effect at 3 mins, slightly softens at 1 hr, softens at 24 hrs
Mineral Spirits, no effect at 3 mins, 1 hr or 24 hrs
Ethanol, no effect at 3 mins, softens at 1 hr and 24 hrs
1,1 – trichloroethane, no effect at 3 mins, 1 hr or 24 hrs
5% sodium hydroxide, no effect at 3 mins, 1 hr or 24 hrs
50% sodium hydroxide, no effect at 3 mins, 1 hr or 24 hrs
5% sulfuric acid, no effect at 3 mins, 1 hr or 24 hrs
50% sulfuric acid, no effect at 3 mins, 1 hr or 24 hrs
5% hydrochloric acid, no effect at 3 mins, 1 hr or 24 hrs
20% hydrochloric acid, no effect at 3 mins, 1 hr or 24 hrs
5% nitric acid, no effect at 3 mins, 1 hr or 24 hrs
20% nitric acid, no effect at 3 mins and 1 hr, blisters at 24 hrs
5% ammonia, no effect at 3 mins, 1 hr or 24 hrs
Gasoline, no effect at 3 mins, 1 hr or 24 hrs
Diesel Fuel, no effect at 3 mins, 1 hr or 24 hrs
Kerosene, no effect at 3 mins, 1 hr or 24 hrs
Brake Fluid, no effect at 3 mins and 1 hr, softens/discolors at 24 hrs
Skydrol, no effect at 3 mins and 1 hr, dulls at 24 hrs

[return to top]

DK120 | Clear Performance Polyaspartic Concrete Floor Coating

SureCrete Design Products DK120 Clear Polyaspartic Concrete Floor Coating is the best polyaspartic system available. DK120 is very user friendly with a longer open time and better heal than all other polyaspartic systems available in North Carolina and South Carolina from Spartacote, Smith Paints, Dur-A-Flex, General Polymers, PPG and other manufacturers. DK120 produces a very smooth finish with a fast recoat interval for reduced labor cost. The finish is highly chemical resistance and abrasion resistant making it the perfect clear interior concrete floor coating system for aircraft hangars, retail stores, grocery stores, garages, and other high traffic locations.

Specifications and properties of DK120 Performance Clear Polyaspartic Concrete Floor Coating from SureCrete Design Products

Coverage: Approximately 300-400 square foot per gallon, per coat (varies based on substrate porosity and application methods)
VOC Rating: less than 330 g/L
Solids Content: 67%
Pot Life: approximately 30 minutes
Shelf Life: 1 year in original unopened container
Ready for recoat: 1-2 hours (extended at low temperatures)
Light Duty Use: 3-4 hours (extended at low temperatures)
Heavy Traffic Ready: 24-36 hours (extended at low temperatures)
Full Cure: 1-2 days (extended at low temperatures)
Appearance (cured): Clear Gloss
Appearance (wet): Clear
Water Resistance: Excellent, beads water
Mechanical Stability: Excellent
Light Stability: Excellent
Odor: Aromatic
Application Temperature: 32 – 90 degrees Fahrenheit
Gardener direct / Reverse impact: More than 160 inch pounds
Taber Abrasion: 40-60 mg loss
QUV – A: less than 5.0 at 2,000 hours
Gloss Retention: More than 95% at 2,000 hours

Chemical Resistance:
MEK (methyl ehtyl ketone), no effect at 24 hours, fails at 7 days
Xylene, no effect at 24 hours, 7 days
Tap Water, no effect at 24 hours, 7 days
Mineral Spirits, no effect at 24 hours, 7 days
100% Ethanol, no effect at 24 hours, 7 days
10% Acetic Acid, no effect at 24 hours, fails at 7 days
50% Sodium Hydroxide, no effect at 24 hours, 7 days
85% Lactic Acid, no effect at 24 hours, fails at 7 days
50% Sulfuric Acid, no effect at 24 hours, 7 days
38% Hydrochloric Acid, no effect at 24 hours, 7 days
28% Ammonia, no effect at 24 hours, fails at 7 days
10% Sodium Chloride, no effect at 24 hours, 7 days
Gasoline, no effect at 24 hours, 7 days
Diesel Fuel, no effect at 24 hours, 7 days
Kerosene, no effect at 24 hours, 7 days
Brake Fluid, no effect at 24 hours, fails at 7 days
Skydrol, no effect at 24 hours, dulls at 7 days
Coffee, no effect at 24 hours, 7 days
Cola, no effect at 24 hours, 7 days
Grape Juice, no effect at 24 hours, 7 days
Ketchup, no effect at 24 hours, 7 days
Mustard, transient staining at 24 hours, 7 days
Clorox Bleach 5-10%, no effect at 24 hours, 7 days

[return to top]

DK180 | High Build Clear Polyaspartic Indoor Concrete Floor Coating

DK180 Clear Polyaspartic Concrete Floor Coating by SureCrete Design Products is a specially formulated 80% solids hybrid solvent based polyaspartic coating. DK180 Polyaspartic has a user-friendly extended pot life of approximately 20 minutes and the ability to create a moderate build single coat top coat. Turnaround time for a floor may be as little as 6 to 8 hours. Decorative vinyl flakes may be covered in a single coat with DK180 high build polyaspartic. DK180 provides a low VOC (less than 200 g/L), UV stable, penetrating, film forming, color enhancing, and high gloss, moderate build wear surface. The rapid cure time eliminates excessive waiting to return a floor to service. It is ideally suited for both commercial and residential settings anywhere in North Carolina and South Carolina: aircraft hangars, clean room floors, manufacturing facilities, warehouses, bars, clubs, retail stores, automotive showrooms, residential interiors, garage floors, stadiums, or any high traffic area where an exceedingly resilient floor is desired.

Specifications and properties of DK180 Clear Polyaspartic Concrete Floor Coating from SureCrete Design Products

Coverage: Approximately 150-200 square foot per gallon, per coat (varies based on substrate porosity and application methods)
VOC Rating: less than 200 g/L
Solids Content: 80%
Pot Life: approximately 20 minutes
Shelf Life: one year in original unopened container
Ready for recoat: Approximately 2 hours (extended at low temperatures)
Light Duty Use: 4-6 hours (extended at low temperatures)
Heavy Traffic Ready: Approximately 24 hours (extended at low temperatures)
Full Cure: 1-2 days (extended at low temperatures)
Appearance (cured): Clear Gloss
Appearance (wet): Clear
Water Resistance: Excellent, beads water
Mechanical Stability: Excellent
Light Stability: Excellent
Odor: Aromatic
Application Temperature: 32 – 90 degrees Fahrenheit
Gardener direct / Reverse impact: More than 160 inch pounds
Taber Abrasion: 40-60 mg loss
Gloss Retention: More than 95% at 2,000 hours

Chemical Resistance
MEK (methyl ehtyl ketone), no effect at 24 hours, fails at 7 days
Xylene, no effect at 24 hours, 7 days
Tap Water, no effect at 24 hours, 7 days
Mineral Spirits, no effect at 24 hours, 7 days
100% Ethanol, no effect at 24 hours, 7 days
10% Acetic Acid, no effect at 24 hours, fails at 7 days
50% Sodium Hydroxide, no effect at 24 hours, 7 days
85% Lactic Acid, no effect at 24 hours, fails at 7 days
50% Sulfuric Acid, no effect at 24 hours, 7 days
38% Hydrochloric Acid, no effect at 24 hours, 7 days
28% Ammonia, no effect at 24 hours, fails at 7 days
10% Sodium Chloride, no effect at 24 hours, 7 days
Gasoline, no effect at 24 hours, 7 days
Diesel Fuel, no effect at 24 hours, 7 days
Kerosene, no effect at 24 hours, 7 days
Brake Fluid, no effect at 24 hours, fails at 7 days
Skydrol, no effect at 24 hours, dulls at 7 days
Transmission Fluid, no effect at 24 hours, 7 days
Coffee, no effect at 24 hours, 7 days
Cola, no effect at 24 hours, 7 days
Grape Juice, no effect at 24 hours, 7 days
Ketchup, no effect at 24 hours, 7 days
Mustard, transient staining at 24 hours, 7 days
Clorox Bleach 5-10%, no effect at 24 hours, 7 days

[return to top]

DK500 | Clear 100% Solids Epoxy Concrete Floor Coating

DK 500 is a clear floor epoxy 100% solids available in a standard, premium, and a thin viscosity options. SureCrete Design Products DK500 epoxy coating floor system, available from Turning Point Innovations in Charlotte North Carolina, can be used in a wide variety of applications such as high build clear coat for a host of decorative concrete systems, a primer coat and binder coat for DK Flakes and DK Metallics. The high performance, self-leveling characteristics of DK500 100% solids epoxy generate the premier balance of strength, flexibility, and chemical resistance that is both user-friendly and extremely durable.

Specifications and properties of DK500 Clear 100% Solids Epoxy Floor Coating from SureCrete Design Products

Coverage: 40-150 square foot per gallon per coat catalyzed product (varies widely based on application method)
VOC Rating: 0 g/L
Solids Content: 100%
Shelf Life: one year in original unopened container
Mixing Ratio: 2 parts A to 1 part B
Pot Life: 10-20 minutes
Ready for recoat: 6-8 hours (may be accelerated)
Light Duty Use: Approximately 16 hours
Heavy Traffic Ready: Approximately 24 hours
Full Cure: 5-7 days
Appearance (cured): High gloss sheen
Appearance (wet): Clear – Straw Color
Water Resistance: Excellent beads water
Mechanical Stability: Excellent
Light Stability: varies with selected hardener
Odor: Sweet
Adhesion: 400 PSI (concrete failure)
Abrasion Resistance (Tabor): 1,000 gm. load @ 500 cycles = 31 mg loss
Compressive Strength: 9,000 PSI
Application Temperature: 50 – 90 degrees Fahrenheit

Chemical Resistance
MEK, not recommended
Xylene, 8 hours splash spill
Gasoline, 2 hours splash spill
Butanol, 8 hours splash spill
Methanol, not recommended
Ethyl Alcohol, 8 hours splash spill
Skydrol, 2 hours splash spill
10% Sodium Hydroxide, long term immersion
50% Sodium Hydroxide, 2 hour immersion
Acetic Acid 5%, 2 hours splash spill
10% Sulfuric Acid, 8 hours splash spill
70% Sulfuric Acid, not recommended
10% Hydrochloric Acid, 8 hours splash spill
20% Nitric Acid, not recommended
Ethylene Glycol, 8 hours splash spill

[return to top]

SureFinish | Industrial Acrylic Wax Floor Finish

SureCrete Design Products SureFinish industrial floor wax is in both a gloss and matte finish in 1 gallon and 5-gallon packages. SureFinish provides a slip resistant floor finish with excellent scuff and scratch resistance helping to ensure maximum durability with a minimum of maintenance on old and new floor coatings.

Specifications and Properties of SureFinish Industrial Acrylic Wax Floor Finish from SureCrete Design Products

Coverage: 1,500 – 3,000 square foot per gallon per coat (varies depending substrate and application method)
VOC Rating: 0 g/L
Shelf Life: one year in original unopened container
Slip Resistance: Meets ASTM 2047 standard for slip resistance in floor coatings. The addition of SureFinish to nearly any surface will increase slip resistance.

[return to top]

SureGrip | Traction Additive for Slip Resistant Non-Skid Floors

The spherical shape of SureGrip provides a smoother feel than most other slip resistant additives. SureGrip is available in both sealer additive and hand-broadcast formulations. SureGrip Additive is available in two different particle sizes, medium and fine. Heavy-Duty = 840 microns or 20 mesh. Regular = 300 microns or 50 mesh.

Specifications and properties of SureGrip Traction Additive from SureCrete Design Products

Coverage: 1 quart additive per 5 gallons of sealer, or approximately 200 square feet per container broadcast
VOC Rating: 0 g/L
Shelf Life: one year in original unopened container
Appearance: Fine white powder

[return to top]