Indoor Colored Concrete Floor Coating Products

> Home » Indoor Colored Concrete Floor Coating Products
Indoor Colored Concrete Floor Coating Products 2017-07-22T14:06:31+00:00

Interior Colored Concrete Sealer Materials | Indoor Colored Concrete Floor Coating Systems

Select from the most comprehensive range of indoor colored concrete floor coating products available in the region. Turning Point Innovations carries in stock the full complement of interior colored concrete sealer materials from SureCrete Design Products. The OnDemand Color System assures you that we will always have available the color you need for your indoor colored concrete floor coating project, using the only alkaline-resistant pigments in the industry that will not fade over concrete. Choose the best interior colored concrete sealer material available anywhere in North Carolina and South Carolina. These interior colored concrete sealer systems are designed for commercial, industrial and manufacturing spaces, and are the best indoor colored concrete floor coating material options for retail and residential locations.

Colored floor sealer for interior floors | Interior floor paint
SureCrete Design Products ColorTec 600WB Colored Epoxy Floor Coating System

ColorTec 600WB | Waterborne Colored Epoxy Concrete Floor Coating System

ColorTec 600WB is a waterborne colored epoxy concrete floor coating system which will withstand up to 13 pounds MVER. ColorTec 600WB is used as a two coat solid color concrete floor coating for warehouses, stock rooms, offices, hallways and other high traffic concrete floor locations. ColorTec 600WB provides an excellent receive coat for decorative vinyl flakes in an epoxy flake floor coating system, and can be the solid color base coat under metallic epoxy floor coating systems. The extreme mechanical bond of ColorTec 600WB to concrete eliminates hot tire pickup.

SureCrete Design Products ColorTec 400 Solvent Polyurethane Colored Concrete Floor Sealer

ColorTec 400 | Colored Solvent Base Polyurethane Concrete Floor Coating

ColorTec 400 is a high gloss, high-performance, durable colored concrete coating for concrete surfaces such as warehouses where high traffic protection is needed. Manufactured with high-quality raw materials and UV stable pigments, our solvent colored polyurethane is a builder and contractors preferred concrete coating. SureCrete Design Products ColorTec 400 colored solvent polyurethane floor coating is ideally suited for both commercial and residential settings throughout North Carolina and South Carolina: aircraft hangars, clean room floors, manufacturing facilities, warehouses, bars, clubs, retail stores, automotive showrooms, residential interiors, garage floors, stadiums, or any high traffic area where an exceedingly resilient floor is required.

SureCrete ColorTec 400WB Water Base Colored Polyurethane Indoor Floor Coating

ColorTec 400WB | Colored Water Base Polyurethane Concrete Floor Coating

SureCrete Design Products ColorTec 400WB commercial grade water-based colored floor polyurethane is manufactured to withstand punishing from forklifts and other industrial traffic. ColorTec 400WB polyurethane floor coating has a low VOC rating and can be used in nearly any high traffic indoor concrete application. ColorTec 400WB Colored Water Base Polyurethane Concrete Floor Coating may be applied directly to concrete or used as a finish coat over an epoxy concrete floor coating. ColorTec 400WB is available in over 200 colors from the SureCrete Design Products OnDemand concrete coating tint system.

SureCrete ColorTec 500 100% Solids Colored Indoor Floor Coating Systems

ColorTec 500 | Colored 100% Solids Epoxy Concrete Floor Coating System

SureCrete Design Products ColorTec 500 100% Solids Colored Epoxy Concrete Floor Coating System is used in a wide variety of applications: as a high-build colored epoxy body coat, as the receive coat for decorative vinyl flakes and as a finish epoxy concrete floor paint. ColorTec 500 is available in over 200 colors using the OnDemand Pigment System from SureCrete Design Products. ColorTec 500 is ideally suited for any commercial or residential setting: manufacturing facilities, warehouses, bars, clubs, retail stores, automotive showrooms, residential interiors, garage floors, gyms, locker rooms, stadiums, or anywhere that an exceedingly resilient floor is desired.

SureCrete ColorTec 180 Colored Polyaspartic Concrete Indoor Floor Paint

ColorTec 180 | Colored Polyaspartic Concrete Floor Coating

ColorTec 180 colored polyaspartic concrete floor coating is a penetrating, film forming, high gloss fast cure industrial grade system. ColorTec 180 may be used stand alone for solid color concrete floor projects and as the receive coat for decorative vinyl flakes in a same day flake floor and quartz aggregate coating systems. ColorTec 180 is suitable for high traffic projects such as aircraft hangars, manufacturing facilities, warehouses, bars, retail stores, grocery deli and meat preparation areas, showrooms and service centers.

SureFinish Industrial Acrylic Wax Floor Finish for Non Slip Coating

SureFinish | Industrial Acrylic Wax Floor Finish

SureFinish is an industrial floor wax product providing exceptional coating protection for both residential and commercial applications where a durable floor protection is needed with a slip-resistant finish. Available in both gloss and matte finishes, SureFinish may be applied over any concrete floor coating or sealer to extend the service life of the coating as well as reduce slip-fall hazards. SureFinish is easy to apply with microfiber pads. SureFinish creates a durable wear surface over floor coatings. Reapply SureFinish as needed depending on traffic and wear.

SureGrip Non Skid Traction Additive for floor coating

SureGrip | Traction Additive for Slip Resistant Non-Skid Floors

SureGrip is a premium grade non-slip additive for interior and exterior sealers or coatings. SureGrip consistently outperforms other slip resistant additives such as Shark Grip in durability, due to its inherent crush resistance. SureGrip is available in standard and heavy duty additive sizes. SureGrip Non-Skid is hand broadcast for maximum traction and slip-fall protection.

The best indoor colored floor coating materials for any interior colored concrete sealer project are available from Turning Point Innovations in Charlotte NC. These are not concrete paint, but true colored concrete sealer systems. Most of your other options are paint formulas that have been modified for application to concrete, but those indoor colored floor coating systems cannot handle the alkalinity of concrete or withstand moisture vapor migration. SureCrete Design Products interior colored concrete floor coating materials are engineered for colored concrete commercial floors, colored coating manufacturing floors, commercial kitchen floor coatings and other heavy traffic applications.

Additional information about the interior colored concrete sealer products available throughout North Carolina and South Carolina:

ColorTec 600WB | Waterborne Colored Epoxy Concrete Floor Coating System

SureCrete Design Products ColorTec 600WB Waterborne Colored Concrete Epoxy Floor Coating is a two component 52% solids, low VOC floor coating system that is used in a wide variety of applications in North Carolina and South Carolina: durable colored layer for both new and old interior concrete floors, primer coat, and binder for DK Flakes and Metallics. The high loading of SureCrete pigments achieves the preferred substrate hide and color uniformity in over 200 colors. May be applied on fresh concrete as soon as three days after pouring and placing concrete.

Specifications and properties of ColorTec 600WB colored waterborne epoxy concrete floor coating from SureCrete Design Products

Coverage: 125 to 350 square foot per gallon (varies based on application method)
VOC Rating: 175 g/L
Solids Content: 52%
Shelf Life: one year in original unopened container
Mixing Ratio: 4 parts A to 1 part B
Pot Life: 1 hour
Ready for recoat: dry to the touch (4 to 18 hours)
Light Duty Use: 16 to 30 hours
Full Cure: 5 to 14 days
Appearance (cured): Gloss sheen
Water Resistance: Excellent, beads water
Mechanical Stability: Excellent
Light Stability: Fair
Odor: Epoxy
Application Temperature: 50 to 90 degrees Fahrenheit

Chemical Resistance:
MEK, not recommended
Xylene, 2 hours splash spill
Gasoline, 2 hours splash spill
10% Sodium Hydroxide, 8 hours splash spill
50% Sodium Hydroxide, 2 hours splash spill
Acetic Acid 5%, 2 hours splash spill
10% Sulfuric Acid, 2 hours splash spill
10% Hydrochloric Acid, 2 hours splash spill
20% Nitric Acid, not recommended
Ethylene Glycol, 8 hours splash spill

[return to top]

ColorTec 400 | Colored Solvent Base Polyurethane Concrete Floor Coating

ColorTec 400 solvent based gloss colored floor polyurethane concrete coating is a two component 51% solids, acrylic aliphatic polyurethane. It is designed as a non-yellowing thin mil color coating for interior concrete, cement based overlays, or as a top finish coat on epoxy systems in North Carolina and South Carolina. This high performance pigmented top coat generates the premier balance of strength, added UV stability, flexibility, chemical and scratch resistance that is both user-friendly and extremely durable.

Specifications and properties of ColorTec 400 Solvent Colored Polyurethane Concrete Floor Coating from SureCrete Design Products

Coverage: Approximately 300-400 square foot per gallon, per coat (varies based on substrate porosity and application methods)
VOC Rating: less than 500 g/L
Solids Content: 51%
Pot Life: Approximately 60 minutes
Shelf Life: one year in original unopened container
Ready for recoat: 6-8 hours
Light Duty Use: 24 hours
Heavy Traffic: Ready in 3 days
Full Cure: 5-7 days
Appearance (cured): Colored Gloss Sheen
Appearance (wet): Varies by Color Selection
Water Resistance: Excellent, beads water
Mechanical Stability: Excellent
Light Stability: Excellent
Mechanical Properties: Direct Impact – 30 inch/pounds; Reverse Impact – 6 inch/pounds
Hardness: Pencil 4H, Konig 100
Diluent: Hydrocarbons
Odor: Solvent
Application Temperature: 50 – 90 degrees Fahrenheit

[return to top]

ColorTec 400WB | Colored Water Base Polyurethane Concrete Floor Coating

SureCrete Design Products ColorTec 400WB water based colored floor polyurethane coating is a two component 57% solids, pigmented acrylic polyurethane designed as a non-yellowing thin mil color coating for concrete, cement-based overlays, or as a top finish coat on epoxy systems. The high performance pigmented top coat provides excellent durability in high traffic areas similar to a solvent base system but with the ease and safety of a low VOC (73 g/L) water base system. The OnDemand concrete coating color system at Turning Point Innovations in Charlotte NC uses alkaline resistant pigments which are UV stable and will not fade. Choose from hundreds of colors, or we can match your color selection from nearly all other manufacturers.

Specifications and properties of ColorTec 400WB Colored Water Base Polyurethane Concrete Floor Coating from SureCrete Design Products

Coverage: Approximately 300-400 square foot per gallon, per coat (varies based on substrate porosity and application methods)
VOC Rating: less than 75 g/L
Solids Content: 57%
Pot Life: approximately 30 minutes
Shelf Life: one year in original unopened container
Ready for recoat: 6-8 hours
Light Duty Use: 24 hours
Heavy Traffic Ready: 3 days
Full Cure: 5-7 days
Appearance (cured): Colored Gloss Sheen
Appearance (wet): Varies by Color Selection
Water Resistance: Excellent, beads water
Mechanical Stability: Excellent
Light Stability: Excellent
Diluent: Water
Odor: Sweet Acrylic
Application Temperature: 50 – 90 degrees Fahrenheit

Chemical Resistance
Gasoline, no effect at 24 hours
Diesel Fuel, no effect at 24 hours
Kerosene, no effect at 24 hours
Brake Fluid, softens/discolors at 24 hours
Skydrol, dulls at 24 hours

[return to top]

ColorTec 500 | Colored 100% Solids Epoxy Concrete Floor Coating System

ColorTec 500 100% Solids Colored Epoxy Concrete Floor Coating System is often used as a single coat system for faster return to service. SureCrete Design Products Colored Concrete Floor Epoxy system is the superior pigmented concrete coating system available on the market today. The pigments used by SureCrete’s tinting station are far more durable and UV resistant than typical pigmented concrete sealers. With tints and pigments like these, your finished Colored Concrete Floor Epoxy 100%, epoxy coating system will last much longer than a normal Colored Concrete Floor Epoxy 100% epoxy sealer ever would, with the color staying much more vibrant over a long period of exposure. Not only are the tints more durable and UV-stable than typical colored concrete sealers, but the color range available is also a great deal wider than those available on the market today. Pigmented ColorTec 500 Epoxy 100 is available in more than 200 standard colors and now, with the power of the tinting station, all these colors and more are available same day from Turning Point Innovations in Charlotte North Carolina. We can even match your color palette from a different manufacturer such as Sherwin-Williams, Dupont, Baer, Valspar or PPG Paints.

Specifications and properties of ColorTec 500 100% Solids Epoxy Concrete Floor Coating from SureCrete Design Products

Coverage: 100-150 square foot per gallon catalyzed product (varies based on application method)
VOC Rating: 0 g/L
Solids Content: 100%
Shelf Life: 1 year in original unopened container
Mixing Ratio: 2 parts A to 1 part B
Pot Life: 10-20 minutes
Ready for recoat: dry to the touch (6-18 hours, or faster with optional accelerator)
Light Duty Use: 16-30 hours
Heavy Traffic: 24-72 hours
Full Cure: 5-14 days
Appearance (cured), High gloss sheen
Appearance (wet), Clear – Straw Color
Water Resistance, Excellent beads water
Mechanical Stability, Excellent
Light Stability, varies with selected hardener
Odor, Sweet
Adhesion, 400 PSI (concrete failure)
Abrasion Resistance (Tabor), 1,000 gm. load @ 500 cycles = 31 mg loss
Compressive Strength, 9,000 PSI
Application Temperature, 50 – 90 degrees Fahrenheit

Chemical Resistance:
MEK, not recommended
Xylene, 8 hours splash spill
Gasoline, 2 hours splash spill
Butanol, 8 hours splash spill
Methanol, not recommended
Ethyl Alcohol, 8 hours splash spill
Skydrol, 2 hours splash spill
10% Sodium Hydroxide, long term immersion
50% Sodium Hydroxide, 72 hour immersion
Acetic Acid 5%, 2 hours splash spill
10% Sulfuric Acid, 8 hours splash spill
70% Sulfuric Acid, not recommended
10% Hydrochloric Acid, 8 hours splash spill
20% Nitric Acid, not recommended
Ethylene Glycol, 8 hours splash spill

[return to top]

ColorTec 180 | Colored Polyaspartic Concrete Floor Coating

SureCrete Design Products industrial grade ColorTec 180 concrete colored floor polyaspartic coating system is a fast drying high traffic interior high gloss durable coating product. ColorTec 180 has an extended pot life for user friendly application and reduced roller lines. The fast recoat interval reduces labor costs and provide a quick return to service for high demand commercial and industrial floor coating projects anywhere in North Carolina or South Carolina. ColorTec 180 is a part of one day floor coating systems allowing same day concrete floor coating projects.

Specifications and properties of ColorTec 180 colored polyaspartic concrete floor coating from SureCrete Design Products

Coverage: Approximately 150-200 square foot per gallon, per coat (varies based on substrate porosity and application methods)
VOC Rating: less than 150 g/L
Solids Content: 88%
Pot Life: approximately 10 minutes
Shelf Life: one year in original unopened container
Ready for recoat: 2 to 3 hours (extended at low temperatures)
Light Duty Use: 4 to 6 hours (extended at low temperatures)
Heavy Traffic Ready: 24-48 hours (extended at low temperatures)
Full Cure: 48 to 72 hours (extended at low temperatures)
Appearance (cured): Colored Gloss Sheen
Appearance (wet): Varies by Color Selection
Water Resistance: Excellent, beads water
Mechanical Stability: Excellent
Light Stability: Excellent
Odor: Aromatic
Application Temperature: 32 to 90 degrees Fahrenheit
Gardener direct / Reverse impact: More than 160-inch pounds
Taber Abrasion: 40-60 mg loss
Gloss Retention: More than 95% at 2,000 hours

Chemical Resistance:

MEK (methyl ethyl ketone), fails at 24 hours, 7 days
Xylene, fails at 24 hours, 7 days
Tap Water, no effect at 24 hours, 7 days
Mineral Spirits, no effect at 24 hours, 7 days
100% Ethanol, no effect at 24 hours, 7 days
10% Acetic Acid,no effect at 24 hours, fails at 7 days
50% Sodium Hydroxide, no effect at 24 hours, 7 days
85% Lactic Acid, no effect at 24 hours, fails at 7 days
50% Sulfuric Acid, no effect at 24 hours, 7 days
38% Hydrochloric Acid, no effect at 24 hours, 7 days
28% Ammonia, no effect at 24 hours, 7 days
Gasoline, no effect at 24 hours, 7 days
Diesel Fuel, no effect at 24 hours, 7 days
Kerosene, no effect at 24 hours, 7 days
Brake Fluid, softens at 24 hours, fails at 7 days
Skydrol, no effect at 24 hours, dulls at 7 days
Transmission Fluid, no effect at 24 hours, 7 days
Coffee, no effect at 24 hours, 7 days
Cola, no effect at 24 hours, 7 days

[return to top]