Outdoor Clear Concrete Sealer Material Systems

> Home » Outdoor Clear Concrete Sealer Material Systems
Outdoor Clear Concrete Sealer Material Systems 2017-07-22T17:06:36+00:00

Exterior clear concrete sealer products | Outdoor clear concrete sealer material systems

Exterior concrete should be protected with an outdoor clear concrete material system. Turning Point Innovations has a broad selection of the best clear exterior concrete sealer products for any project. Protect new stamped concrete with a UV stable clear concrete cure and seal product. Select a workhorse outdoor clear concrete sealer for older work and to seal over cured concrete. Choose one of our high performance Silane acrylic clear concrete sealers for colored thin concrete overlay projects. If your current supplier carries only one or two options for outdoor clear concrete material systems then it is time for you to consult the Concrete Experts at Turning Point Innovations and learn more about clear exterior concrete sealer products.

Outdoor clear concrete sealer for exterior concrete sealer projects
CS-250 Stamped Concrete Cure and Seal concrete sealer

CS250 | UV-Stable Concrete Cure and Seal for New Concrete

CS250 Concrete Cure and Seal is a solvent-based, non-dissipating cure and seal finishing membrane that enhances the curing process of freshly-placed concrete. CS250 Cure and Seal from SureCrete Design Products is one of the only cure and seal products available formulated with beaded acrylics, making it UV stable. The enhanced UV stability of CS250 Concrete Cure and Seal provides a much longer service life than most other concrete cure and seal formulas. CS250 Cure and Seal protects new stamped concrete and provides excellent color enhancement.

SureCrete HS200 Silane Acrylic Concrete Sealer for Outdoor Concrete

HS200 | Premium Clear Silane Acrylic Concrete Sealer 20% Solids

HS200 Clear Silane Acrylic Performance Concrete Sealer provides maximum protection for cured exterior concrete. The Silane acrylics of HS200 keep the solvents open longer for slower evaporation, helping drive the premium acrylic solids deeper into the surface of concrete for a higher level of performance and extended service life. HS200 Clear Silane Acrylic Concrete Sealer is used on stamped concrete, concrete driveways with heavy vehicle traffic, patios, walkways and sidewalks. HS200 Silane Acrylic Sealer from SureCrete Design Products reduces moisture migration through concrete to help minimize concrete efflorescence.

SureCrete HS300 Clear Silane Acrylic Sealer for Concrete Overlay

HS300 | Premium Clear Silane Acrylic Concrete Sealer 30% Solids

HS300 Performance Silane Acrylic Concrete Sealer is a 30% Solids clear sealer for concrete and concrete overlay. HS300 is designed for extreme climates to protect concrete and concrete overlay from excessive freeze thaw cycling. HS300 Silane Acrylic Concrete Sealer is vapor permeable and will tolerate high moisture vapor emission from concrete. The Silane properties keep the solvents open longer for deeper penetration into concrete and concrete overlay, plus an extended open time which makes it easier to roll out evenly.

SureCrete Super 20 Clear Acrylic Concrete Driveway Sealer

Super 20 | Clear Acrylic Twenty Percent Solids Concrete Sealer

Super 20 Clear Acrylic Concrete Sealer is a solvent-based clear exterior concrete sealer for driveways, sidewalks, patios and other outdoor concrete. Super 20 provided excellent protection to concrete with superior color enhancement. Super 20 finishes as a high gloss exterior concrete sealer with a breathable membrane that minimizes whiting and cloudiness from excessive moisture migration in concrete. Use Super 20 Clear Acrylic Concrete Sealer from SureCrete Design Products on smooth concrete, as a sealer for broom finished concrete and to seal stamped concrete.

SureCrete Super 30 Clear Acrylic Concrete Sealer for Outdoor Concrete

Super 30 | Clear Acrylic Thirty Percent Solids Concrete Sealer

Super 30 Clear Acrylic Concrete Sealer is a high solids sealer for exterior concrete. Super 30 Concrete Sealer is thirty percent solids for high gloss and excellent color enhancement. Use Super 30 Clear Acrylic Concrete Sealer on driveways, sidewalks, patios and stamped concrete. Super 30 from SureCrete Design Products forms a breathable membrane which will tolerate moisture migration through outdoor concrete.

RS-100 Clear Stone Sealer to seal natural stone

RS-100 Natural Stone Sealer

RockSteel RS-100 is a next generation, deep penetrating, seamless reactive silicon complex that forms a powerful polymer that chemically/molecularly bonds with the substrate it is applied upon.  The barrier formed protects the surface for years and years from salt water, chemicals, weathering and chemicals found in chlorine pools.  The engineered polymer of silane and siloxane silicone molecularly bonds to the substrate forming an uncompromising barrier that resists penetration from water, elements in or suspended in the water such as salt and pool chemicals, many liquids, many acids and more.

WL-350 Wet Look Stone Sealer for natural stone

WL-350 Natural Stone Sealer

WetLook Enhancer WL350 is a premium quality product for applications where fast drying, excellent durability and wet area application (pools, waterfalls) are a requisite. WL350 is a breakthrough formulation combining reactive silicone and acrylic complexes that form a high performance polymer that powerfully penetrates and adheres to the substrate. The barrier formed protects the surface for years and years and will retain its deep glossy shine. The advanced polymer of silicone and acrylic resins penetrates into the substrate and securely anchors to the substrate forming an uncompromising barrier that resists penetration from water, elements in or suspended in the water such as salt and pool chemicals, oils, and more. WL350 silicone base forces deeper penetration preventing tear or peel off; additionally because it has superior penetrating properties it will withstand hydrostatic lifting much better than an acrylic based coating.

SureGrip Heavy Duty Traction Additive to make concrete sealer non slip

SureGrip | Traction Additive for Slip Resistant Non-Skid Floors

SureGrip is a premium grade non-slip additive for interior and exterior sealers or coatings. SureGrip consistently outperforms other slip resistant additives such as Shark Grip in durability, due to its inherent crush resistance. SureGrip is available in standard and heavy duty additive sizes. SureGrip Non-Skid is hand broadcast for maximum traction and slip-fall protection.

The most broad selection of the best outdoor clear concrete sealer products is found at Turning Point Innovations in Charlotte NC. These exterior clear concrete sealers are ideal to protect concrete throughout North Carolina and South Carolina.

Additional information on these leading outdoor clear concrete sealer products. Shipping is available to anywhere in North Carolina and South Carolina, including Greensboro, Raleigh, Asheville, Wilmington, Greenville, Columbia, Spartanburg, Florence, Charleston and Myrtle Beach.

CS250 | UV-Stable Concrete Cure and Seal for New Concrete

CS250 Concrete Cure and Seal from SureCrete Design Products is designed to help the curing process of newly poured concrete in North Carolina and South Carolina. Concrete sealed with CS250 Concrete Cure and Seal shortly after placement retains more even moisture to help increase compressive strength, making the concrete surface stronger and more durable. Cure and Seal helps manage efflorescence, strengthens the cream finish of concrete and helps produce more consistent color enhancement.

CS250 Concrete Cure and Seal is a twenty-five percent solids (25% solids), solvent based, non-dissipating, color enhancing, gloss finish curing membrane that meets the following standards:

ASTM C 1315-11: Standard Specification for Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concrete
ASTM C 309-11: Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete
Solids 25%

Specifications and properties of CS250 Cure and Seal from SureCrete Design Products:

VOC Rating: 600 g/L
Type of Acrylic: Beaded
Appearance (Cured): Clear, Gloss
Appearance (Wet): Clear
Application Temperature: 50°F – 90°F (10° – 32°C)
Odor: Solvent

[return to top]

HS200 | Premium Clear Silane Acrylic Concrete Sealer 20% Solids

SureCrete Design Products HS200 Clear Silane Acrylic Concrete Sealer is a premium exterior Silane Based clear concrete sealer for durable protection on driveways and pool decks as well as high traffic walkways and sidewalks. HS200 is a 20% Solids (twenty percent solids) silane based acrylic sealer. HS200 is Surecrete’s most advanced solvent-based silane acrylic sealer. It is a premium exterior clear stamped concrete sealer that is designed for exterior concrete applications that need attributes such as: slower evaporating solvents, efflorescence reducers, crystal clear finish, and can protect against freeze-thaw elements. HS200 is ideal for vehicular areas anywhere in North Carolina or South Carolina such as driveways, golf cart paths, and other areas where a high gloss clear durable sealer is required. It can also be used in heavy foot traffic surfaces such as walkways, sidewalks, and porticos. The slower evaporating solvents help to give the applicator more time to apply before it becomes tacky and begins to create spider webs. The silane used helps reduce efflorescence, by managing moisture migration. HS200 uses the highest quality acrylics to give a crystal clear, gloss finish on all exterior concrete surfaces.

Specifications and Properties of HS200 Clear Performance Silane Acrylic Concrete Sealer from SureCrete Design Products

Coverage: Approximately 200-240 square foot per gallon, per coat (varies based on substrate porosity and application methods)
VOC Rating: less than 600 grams per liter
Solids Content: 20% – twenty percent
Shelf Life: 2 years in original unopened container
Ready for recoat: dry to touch
Light Duty Use: 24 hours
Heavy Traffic Ready: 72 hours
Appearance (cured): Clear Gloss
Appearance (wet): Clear
Water Resistance: Excellent beads water
Mechanical Stability: Excellent
Light Stability: Excellent
Diluent: Hydrocarbons
Odor: Solvent
Application Temperature: 50 – 90 degrees Fahrenheit
Blush 4 hr dry / 18 hr Immersion: No Blush
Adhesion Dry Concrete: Excellent,
Adhesion Wet Concrete: Excellent
QUV Accelerated Weather Testing G-53: No blistering, No yellowing @ 250 hours
Abrasion Resistance: 12.5 grams loss
Block Resistance D-4969: Excellent
Heat Stability @ 120 degrees Fahrenheit D-1849: Excellent
Film Formation @ 40 degrees Fahrenheit: Passed
Water Absorption: 2.4 grams per cubic meter
Pencil Hardness D-3363: HB-H
Hot Tire Pick-Up: Passed

Chemical Resistance, ASTM D-1308:
Transmission Fluid, Resistant
Gasoline, Remove Immediately
Formula 409, Resistant
Motor Oil, Resistant
Brake Fluid, Remove Immediately

[return to top]

HS300 | Premium Clear Silane Acrylic Concrete Sealer 30% Solids

SureCrete Design Products HS300 Silane Acrylic Performance Concrete Sealer is a premium, high-performance, single-component, 30% acrylic solids sealer designed for SureCrete overlays and natural concrete. HS300 is specially formulated for extreme climates, it deeply penetrates concrete and reacts internally with cement, slowing moisture migration and efflorescence and intensifying bond. We in North Carolina, South Carolina and Virginia deal with freeze and thaw cycles that require the high performance and extended service life of HS300 Silane Acrylic Concrete Sealer. Over time and multiple freeze/thaw cycles, when most other acrylic sealers begin to delaminate and detach from the original substrate, HS300 will continue to protect concrete from water and salts.

Specifications and Properties of HS300 Premium Silane Acrylic Concrete Sealer from SureCrete Design Products

Coverage: Approximately 200-240 square foot per gallon, per coat (varies based on substrate porosity and application methods)
VOC Rating: less than 600 g/L
Solids Content: 30% thirty percent solids concrete sealer
Shelf Life: 2 years in original unopened container
Ready for recoat: dry to touch
Light Duty Use: 24 hours
Heavy Traffic Ready: 72 hours
Appearance (cured): Clear Gloss
Appearance (wet): Clear
Water Resistance: Excellent, beads water
Mechanical Stability: Excellent
Light Stability: Excellent
Diluent: Hydrocarbons
Odor: Solvent
Application Temperature: 50 – 90 degrees Fahrenheit
Blush, 4 hr dry / 18 hr Immersion: No Blush
Adhesion, Dry Concrete: Excellent
Adhesion, Wet Concrete: Excellent
QUV Accelerated Weather Testing, G-53: No blistering, No yellowing @ 250 hours
Abrasion Resistance, 12.5 grams loss
Block Resistance, D-4969: Excellent
Heat Stability @ 120 degrees Fahrenheit, D-1849: Excellent
Film Formation @ 40 degrees Fahrenheit, Passed
Water Absorption, 2.4 grams per cubic meter
Pencil Hardness, D-3363: HB-H
Hot Tire Pick-Up, Passed

Chemical Resistance, Testing ASTM D-1308
Transmission Fluid, Resistant
Gasoline, Remove Immediately
Formula 409, Resistant
Motor Oil, Resistant
Brake Fluid, Remove Immediately

[return to top]

Super 20 | Clear Acrylic Twenty Percent Solids Concrete Sealer

Super 20 Clear Acrylic Concrete Sealer by SureCrete Design Products is a solvent-based exterior concrete clear sealer for NC and SC driveways, sidewalks, and other applications that require a clear sealer to protect concrete surfaces and color. Super 20 twenty percent solids concrete sealer uses quality acrylics to allow for a consistent color enhancement, high gloss finish, and breath-ability that minimizes cloudiness and haziness when moisture is trapped underneath the outdoor concrete. Super 20 is a twenty percent solids, solvent based, crystal clear acrylic, color-enhancing, high gloss finish designed to waterproof, seal, and treat smooth, broomed, and textured concrete exterior surfaces. Choose Super 20 when applying new concrete sealer over an older sealer.

Specifications and properties of Super 20 Clear Acrylic 20% Solids Concrete Sealer from SureCrete Design Products

Solids Content: 20% twenty percent solids acrylic concrete sealer
VOC Rating: 600 g/L
Appearance (Cured): Clear, Gloss
Appearance (Wet): Clear
Application Temperature: 50 – 90 degrees Farenheit
Odor: Solvent
Packaging: 1-Gallon and 5-Gallon pails
Blush: 4 hr. dry /No blush 18 hr. immersion
Adhesion D-3359, Dry Concrete: Excellent
Adhesion D3359, Wet Concrete: Excellent
QUV accelerated weather testing: G-53 250 hr. no blistering, no yellowing
Abrasion resistance: 12.5 grams loss
Block resistance: D-4946 Excellent
Heat stability at 120 degrees F D-1849: Excellent
Film formation at 40 degrees F : Passed
Water absorption: 2.4 gram per cubic meter
Pencil hardness: D-3363 / HB-H
Hot tire pick-up: Passed

Chemical Resistance, ASTM D-1308
Transmission fluid, Resistant
Gasoline, Remove immediately
Formula 409, Resistant
Motor oil, Resistant
Brake fluid, Remove immediately

[return to top]

Super 30 | Clear Acrylic Thirty Percent Solids Concrete Sealer

Super 30 Clear Acrylic Concrete Sealer by SureCrete Design Products is a solvent-based thirty percent solids exterior concrete clear sealer for driveways, sidewalks, and other North Carolina and South Carolina applications that require a clear sealer to protect concrete surfaces and color. Super 30 exterior concrete clear sealer is used to protect existing concrete and cement-based overlays. Super 30 clear sealer uses quality acrylics to allow for a consistent color enhancement, high gloss finish, and breathability that minimize cloudiness and haziness when moisture is trapped underneath the outdoor concrete. Super 30 is a thirty percent solids, solvent based, crystal clear acrylic, color-enhancing, high gloss finish designed to waterproof, seal, and treat cement-based overlays on exterior surfaces.

Specifications and properties of Super 30 Clear Acrylic Thirty Percent Solids Concrete Sealer from SureCrete Design Products

Solids Content: 30%
VOC Rating: 600 g/L
Appearance (Cured): Clear, Gloss
Appearance (Wet): Clear
Application Temperature: 50 – 90 degrees Farenheit
Odor: Solvent
Blush: 4 hr. dry /No blush 18 hr. immersion
Adhesion D-3359, Dry Concrete: Excellent
Adhesion D-3359, Wet Concrete: Excellent
QUV accelerated weather testing: G-53 250 hr. no blistering, no yellowing
Abrasion resistance: 12.5 grams loss
Block resistance: D-4946 Excellent
Heat stability at 120 degrees F D-1849: Excellent
Film formation at 40 degrees F: Passed
Water absorption: 2.4 grams per cubic meter
Pencil hardness: D-3363 / HB-H
Hot tire pick-up: Passed

Chemical Resistance ASTM D-1308
Transmission fluid, Resistant
Gasoline, Remove immediately
Formula 409, Resistant
Motor oil, Resistant
Brake fluid, Remove immediately

[return to top]